AeroShell Grease 22

AEROSHELL Grease 22 is a Purpose Grease

AeroShell Grease 22 is a versatile advanced general purpose grease composed of a synthetic hydrocarbon oil
thickened with Microgel®, with outstanding performance characteristics. Appropriate additives are included to achieve
the necessary oxidation and corrosion resistance, anti-wear properties and load carrying properties.

Application
AeroShell Grease 22 is especially recommended for use wherever severe operating conditions are encountered as in
high bearing loads, high speeds, wide operating temperature range, and particularly where long grease retention and high
resistance to water washout are required.

The wide range of applications include aircraft wheel bearings, engine accessories, control systems, actuators,
screw-jacks, servo mechanisms and electric motors, helicopter rotor bearings, instruments, airframe lubrication, hinge pins,
static joints, landing gears.

AeroShell Grease 22 contains a synthetic hydrocarbon oil and should not be used in contact with incompatible seal materials.
The useful operating temperature range is –65° C to +204° C.

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

AEROSHELL Grease 14

AeroShell Grease 14 is a helicopter multi-purpose grease composed of a mineral oil thickened with a calcium soap, possessing outstanding anti-fret and anti-moisture corrosion properties. It is oxidation and corrosion inhibited.

Main Applications

• AeroShell Grease 14 is the leading helicopter multi-purpose grease and is approved by all helicopter manufacturers.

• Owing to its anti-fret properties, AeroShell Grease 14 is particularly suitable for the lubrication of helicopter main and tail rotor bearings, splines, etc.

Specifications, Approvals & Recommendations

• U.S. : Approved MIL -G-25537C

• British : Approved DEF STAN 91-51

• NATO Code : G-366

• Joint Service Designation : XG-284

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

AeroShell Fluid S.8350

AeroShell Fluid S.8350 is an SAE 90 extreme pressure gearbox oil.

Main Applications

• AeroShell Fluid S.8350 is used for helicopter rotor gears, drive-shafts and pitch control mechanisms and wherever high loads and slow speeds in gears require the use of a 90 EP gear oil. AeroShell Fluid S.8350 is approved for use in various Westland helicopter gearboxes.
• AeroShell Fluid S.8350 must not be used in engines.

Specifications, Approvals & Recommendations

_·Joint Service Designation OEP-215

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

AeroShell Fluid 71

AEROSHELL Fluid 71 is a Hydraulic Fluid

AeroShell Fluid 71 is a preservative mineral hydraulic fluid of improved cleanliness. AeroShell Fluid 71 is composed of
a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties
as well as excellent oxidation stability, and good anti-wear characteristics.
AeroShell Fluid 71 is dyed red. The useful operating temperature range is –54° C to +121° C.

Application
AeroShell Fluid 71 is intended for preserving hydraulic equipment in storage and also for use in rig testing of
hydraulic components.
AeroShell Fluid 71 should only be used in hydraulic systems employing synthetic rubber seals suitable for MIL-PRF-
5606/DEF STAN 91-48 (AeroShell Fluids 4 or 41) type of fluids.
AeroShell Fluid 71 is compatible with AeroShell Fluids 4, 31, 41, 51 and 61.
Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 71. The residual solvent
contaminates the hydraulic fluid and may lead to corrosion.

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

AEROSHELL Fluid 61

AeroShell Fluid 61 is a synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil and good corrosion preventive protection to the hydraulic system.

Main Applications

• AeroShell Fluid 61 is designed for use where a fire resistant preservative grade hydraulic fluid is required and is suitable for operational use as well as preservation of components during storage and shipment.

• AeroShell Fluid 61 has an operating temperature range of –40⁰C to +204⁰C.

• AeroShell Fluid 61 is compatible with AeroShell Fluids 4, 31, 41, 51 and 71.

• AeroShell Fluid 61 is a synthetic oil and should not be used in contact with incompatible seal materials.

• Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 61. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.

Specifications, Approvals & Recommendations

• Approved MIL-PRF-46170D

• NATO Code H-544

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.

AEROSHELL Fluid 602

AeroShell Fluid 602 synthetic base fluid is composed of highly branched, compact and very stable molecules known as polyalphaolefins (PAO), blended with additives to provide long term storage stability.

AeroShell Fluid 602 offers exceptional performance over a wide temperature range and does not react with water, resulting in clean systems and long fluid and component life.

Main Applications

• AeroShell Fluid 602 is most widely used as a cooling fluid for aircraft avionic systems, whose benefits include lower initial cost, longer fluid life, lower weight and lower toxicity when compared with other types of avionic system coolants. Since AeroShell Fluid 602 does not react with water, no reclamation equipment is required, adding further to the cost advantage.

Specifications, Approvals & Recommendations

• Approved MIL-PRF-87252C (US)
• NATO Code S-1748

Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.