Klüber Klüberbeta VR 67-3500

Klüber Klüberbeta VR 67-3500 Is a soft white adhesive silicone grease

Klüber Klüberbeta VR 67-3500 is a Special soft grease for sanitary, beverage and heating valves and taps

Benefits for your application

– Prolonged service life of cartridges, valves and fittings due to
– continuous wetting of the friction surfaces
– compatibility with most standard elastomers and plastics
– friction and wear reduction in most material combinations
– Prevents stick-slip and provides balanced damping of operation
– temperature has little effect on lubricating film thickness
– Certified for use in drinking water and beverage taps
– according to UBA (German Environmental Agency) guideline (KTW), NSF 61, WRAS, ACS, AS 4020
– further certification available on request
– NSF H1 registered supporting process reliability

Description

Klüberbeta VR 67-3500 is a soft white adhesive silicone grease. The particular consistency and the use of special silicone oils ensure reliable operation over a wide temperature range for sanitary, beverage and heating valves and taps.

Klüberbeta VR 67-3500 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.

The use of Klüberbeta VR 67-3500 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Application

Klüberbeta VR 67-3500 is suitable for drinking water and beverage taps as well as in heating installations whenever complex friction geometries require a fluid grease distribution.

Typical applications include the lubrication of ceramic discs, e.g. in single lever mixer taps, piston mixers, shower valves,
thermostats, and similar components.

Klüberbeta VR 67-3500 generally provides load-bearing lubricating films up to 2.5 N/mm² under normal operating conditions in the industry. Depending on the design, this value can also be exceeded. Due to its consistency, Klüberbeta VR 67-3500 is particularly
suitable as assembly lubricant for seals, O rings and seal packings.

It also reduces friction and wear in other components like plastic taps, packings and laboratory equipment.

Application notes

Klüberbeta VR 67-3500 is neutral towards most metals, thermoplastics and elastomers. Owing to the many differentelastomer and plastic compositions their compatibility should be checked prior to series applications. Klüberbeta VR 67-3500 can be applied by means of spatula, brush, usual metering devices or the tampon printing method. Please observe the material safety data sheet.

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.