Klüber Wolfracoat C Fluid

Klüber Wolfracoat C Fluid Is a viscous High-temperature lubricating compound.

Benefits for your application

Very good corrosion protection → increased component lifetime
Ready-for-use → just mix vigorously
Low consumption → low costs, high efficiency
Easy application → reduces maintenance time
Easier to mix in smaller canisters → less effort required
No part-used stock → the 5 l pack size matches the tank of the Klübermatic KD spray pump

Description

WOLFRACOAT C FLUID is a viscous high-temperature release agent and lubricating compound based on a mineral and ester oil mixture. It contains solid lubricants, metal pigments and an inorganic thickener. The base fluid starts to evaporate at approx. 200°C, leaving a solid lubricant film, which separates frictional surfaces (dry lubrication).

Application

WOLFRACOAT C FLUID was developed as a lubricating compound for surfaces subject to high thermal loads, as e.g. in rotary kilns in the base material industry (chemical industry, cement, ore processing, etc.) between the inner surfaces of the tyres and the kiln shell’s slide elements as well as the running surfaces of the axial supports. WOLFRACOAT C FLUID is also suitable for the lubrication of pouring ladles used in the steel
industry, and could also be used as a screw compound for hightemperature bolt and screw connections.

Application notes

WOLFRACOAT C FLUID is usually applied to the area between the tyre and the kiln shell with the Klübermatic KD manual spray jet equipment (other commercially available spray devices can also be used). In other cases the product can also be applied by brush. Each tyre should be relubricated once a week with 2-3 litres of WOLFRACOAT C FLUID according to the tyre width. It is important to ensure relative motion between the tyre and the kiln shell. We recommend reference to the relative motion value stated by the OEM (between 10 and 30 mm).