Klüber Summit NGL 888

Klüber Summit NGL 888 Is a synthetic gas compressor lubricant.
Klüber Summit NGL 888 is a Synthetic gas compressor lubricants.

Benefits for your application

– For high pressure reciprocating compressors pumping natural gas, carbon dioxide or process gases
– Extremely resistant to hydrocarbon dilution and absorption and good chemical resistance to process gases
– Very high viscosity index, thus low viscosity change in a wide temperature range
– Very good wear protection for longer component lifetime
– Low residue formation for longer lifetime of valves and piston rings

Description

Klüber Summit NGL compressor lubricants are based on polyalkylene glycols and special additives.
In high-pressure reciprocating compressors pumping natural gas or hydrocarbon-based process gas, petroleum based lubricants are easily absorbed into the gas stream and diluted by the gas. Klüber Summit NGL lubricants are extremely resistant to hydrocarbon dilution and gas stream absorption.

The extremely high viscosity index of both products ensures efficient lubricity in a wide temperature range.

Application

The Klüber Summit NGL series is designed for high pressure reciprocating compressors pumping natural gas, carbon dioxide or process gases (e.g. hydrogen, helium, nitrogen).

The Klüber Summit NGL series is designed for all oil-lubricated components in reciprocating compressors, e.g. cylinder, highpressure
packing, bearings and engine. Please observe the manufacturer’s viscosity specifications.

Klüber Summit NGL-888 is particularly suitable for injection compressors used in oil and gas fields because it is water soluble and compatible with well-bore treatment fluids.

Due to the varying make-up of gases and operating conditions, please contact your local Klüber representative for specific product recommendations.

Application notes

The Klüber Summit NGL series is not miscible with mineral oil or PAO! If you wish to change over from mineral oil/PAO oils to the Klüber Summit NGL series, please observe our changeover instructions.

Drain as much of the previously used compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines.

Afterwards clean or change the filter, then recharge with the Klüber Summit NGL operational lubricant. We recommend attaching a label indicating the type of lubricant used and the filling date to the filter or the cover.

Materials compatibility

Klüber Summit NGL compressor lubricants have been designed to be compatible with NBR (share of acrylonitrile > 30%), EPDM, MVQ (silicone rubber), PTFE, polyurethane foams, as well as paints based on phenolic and epoxy resin. They should not be used with paints based on acrylic resin, polyurethane paints and plastic materials such as PVC, polycarbonate and ABS.

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.