Klüber Klübertop TP 29-1310 A/B Komp. A

Klüber Klübertop TP 29-1310 A/B Komp. A Is a water-miscible two-component bonded coating for elastomers.

Benefits for your application

– Water-miscible two-component blonded coating for elastomers
– Soft, visually appealing surface
– Suitable for sponge and conventional rubber
– For offline coating
– High elasticity
– Good abrasion resistance
– Good adhesion
– Contains UV-indicator (excitation at 300 – 400 nm)

Description

Klübertop TP 29-1310 A/B is a black, two-component bonded coating for elastomers. As it is cross-linking at ambient temperature, it is particularly suitable for offline application on sponge and conventional rubber. Owing to its soft surface, Klübertop TP 29-1310 A/B can be used in all areas where an appealing appearance is just as important as reliable operation. One of the main advantages of this product is its good adhesion on materials like EPDM, TPE, NBR, CR, NR, SBR and AU. Klübertop TP 29-1310 A/B contains selected solid lubricants and an organic, water-miscible binding agent. Klübertop TP 28-1311, a one-component heat-setting coating with the same properties, is available for on-line processes.

Application

Klübertop TP 29-1310 A/B is especially suitable for offline coating processes for unflocked automotive seals made of sponge or conventional rubber, including:

– door seals
– folding top seals
– trunk seals

Application notes

Klübertop TP 29-1310 A/B can be applied by spraying or by brush.

Spraying:

Feed pressure: approx. 2 bar
Nozzle diameter: 0.5 mm to 0.8 mm
The recommended coating thickness is approx. 7 to 15 µm.
As component B (hardener) use Klübertop TH 1 component B.
A primer should be used for all cases where improved adhesion is required.
Ensure that only oil and water-free compressed air is used. Protect from frost and heat. If frozen, let the product thaw at room temperature and then stir it thoroughly.