Klüber Klüberpaste UH1 96-402 Spray

Klüber Klüberpaste UH1 96-402 Spray Is a light-coloured high-temperature paste for the food-processing and pharmaceutical industries.

Your benefits at a glance

– Reliable dry lubrication at temperatures from 200 °C to 1200 °C
– Good adhesion to the friction point, also when subject to humidity

Your requirements – our solution

Klüberpaste UH1 96-402 Spray is a high-temperature paste designed for versatile assembly purposes in hygienically sensitive environments. It contains fully synthetic base oils and a special blend of ceramic solid lubricants. Across the “normal” temperature range up to approx. 160 °C, Klüberpaste UH1 96-402 Spray is a water-resistant lubricating and assembly paste providing good adhesion on metals. Under permanently high temperatures up to 1200 °C, its solid lubricating particles remain in the friction contact and protect e.g. fits against tribocorrosion or fretting corrosion.

Klüberpaste UH1 96-402 Spray is NSF H1 registered and therefore in compliance with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberpaste UH1 96-402 Spray can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP.

Application

Klüberpaste UH1 96-402 Spray is suitable for a variety of friction points in food-processing and pharmaceutical machines which are subject to high loads
– as an assembly paste for transition and loose fits to prevent fretting corrosion
– as a paste for screw connections based on high-alloy steels to optimise the tightening torque and demounting, even after long operating periods
– as a long-term lubricant for low-speed guide rails, hinges, rollers, etc.

The friction values indicated in the Product data section were measured with two different materials. Other materials have to be checked accordingly.

Application notes

Shake well before use. Ensure sufficient ventilation during spraying as explosive mixtures may form.

Do not spray against naked flame or onto hot or incandescent objects.
Do not use spray in confined areas, e.g. control cabinets.
Observe additional instructions for use in material safety data sheet and on can label.
Before applying Klüberpaste UH1 96-402 Spray, all lubrication points should be thoroughly cleaned using e.g. Klüberfood NK1 Z 8-001 Spray, to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.
Protect product against direct sunlight and temperatures above 50 °C.