Klüber Klüberflex 200-0 A/B Komp. A

Klüber Klüberflex 200-0 A/B Komp. A Is a water-miscible two-component anti-friction coat

Klüber Klüberflex 200-0 A/B Komp. A is a Water-miscible two-component bonded coating for windshield wipers and other elastomer components

Your benefits at a glance

– Optimised friction behaviour of your wiper rubber
– Low cross-linking temperature, enabling use with temperature-sensitive elastomers such as CR, NR
– High flexibility in meeting your requirements
– Individual product adjustments possible with selected additional Klüberflex modules
– Lower application costs
– No air filter systems required as VOC < 10g/l
– Rapid quality inspection upon layer application due to integrated UV indicator (excitation at 300 – 400 nm)

Your requirements – our solution

Klüberflex 200-0 N A/B Komp. A is an innovative, watermiscible two-component bonded coating system for windshield wipers and other elastomer components.

Compared with conventional graphite dispersions, this bonded coating has a matrix with good resistance to abrasion and chemicals and offers good friction characteristics. Dirty hands are a frequent complaint in the handling of wipers coated with graphite dispersion; with Klüberflex 200-0 N A/B Komp. A, this is not the case.

Klüberflex stands for a modular product concept enabling highly individualised product design due to optional additional modules. Adhesion and friction characteristics, for instance, can be adjusted to suit the material used and the requirements of the end customer by adding specific modules.


Klüberflex 200-0 N A/B Komp. A enables a reduction in friction coefficient on windshield wiper elastomer materials. Application to other elastomer components is possible, e.g. Orings.

Application recommendation:

Both online spraying in the extrusion stage and offline spraying are possible.

Application notes

Recommended data for spray application: Klüberflex 200-0 N A/ B Komp. A
Feed pressure: approx. 2 bar
Spray nozzle diameter: 0.5 mm to 0.8 mm
Ensure that only oil- and water-free compressed air is used.

The recommended layer thickness for tribological applications is approx. 5 to 10 µm.

Should stronger adhesion be required for the application in hand, we recommend adding 2 to 5 % of Klüberflex Module 2, or performing a plasma pretreatment, if possible. Further modules for the optimisation of friction can be obtained on request.

NOTE: Any additional modules may only be added after the A and B components have been mixed.
Additional notes for the application of Klüberflex 200-0 N A/B Komp. A

Application technique: spraying

(Notes on other application methods can be obtained on request)

Klüberflex 200-0 N A/B Komp. A is a coating system comprising two components!
The hardening agent to be used is Klübertop TH 01 component B.
When processing the product, please proceed as follows:

Before use, stir component A well by means of an electric stirrer. Add component B to component A.


Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.