Klüber Klübercut CO 6-102 Spray

Klüber Klübercut CO 6-102 Spray Is a metal-working oil

Klüber Klübercut CO 6-102 Spray is an Environmentally compatible, synthetic stern tube oils

Your benefits at a glance

– Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
– Completely biodegradable and not toxic to marine organisms reducing environmental impact in the event of leakage
– FKM elastomers available from leading propeller shaft seal manufacturers are compatible and approved for use with

Klüberbio RM 2 oils to prevent leakage and contamination Your requirements – our solution

Klüberbio RM 2 oils are completely biodegradable oils for stern tubes based on synthetic ester oil showing good ageing and oxidation stability.
As the lubricants are readily biodegradable and contain carefully selected raw materials, oil loss or leakage are less
dangerous to the environment.

Klüberbio RM 2 oils contain > 90 % of renewable raw materials and bear the European Ecolabel.

The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards
throughout their life-cycle: from raw material extraction, to production, distribution and disposal.

Attaining EU Ecolabel certification provides ship owners and/or operators with independent assurance that the product achieves the U.S. EPA’s requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA’s VGP.

Klüberbio RM 2 oils show a high shear stability and form a strong hydrodynamic oil film even when subject to high loads.

Application

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals.

Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers.
Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.

Application notes

In general, Klüberbio RM 2 oils are miscible with mineral oil based stern tube lubricants. However, a miscibility test should be performed in order to totally rule out the possibility of an  incompatibility between different additives. Prior to changeover,
we recommend flushing the stern tube with the Klüberbio RM 2 oil.

Klüberbio RM 2 oils need to be approved by the OEMs of your propeller shaft seal or bearing. In case the oil has not yet been approved or the specification of the seal or bearing has been changed – e.g. type, design or material – we recommend consulting the OEM prior to the oil change.
Owing to the many different elastomer compositions of seals we recommend – prior to series application – checking the compatibility and other influencing factors that are relevant for the application with the component under conditions similar to practice.

 

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.




INTERNATIONAL SHIPPING

ABC

EU SHIPPING:

DHL
DPD
GLF
iloxx